Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Cambridge, MA (02163) · Local Professionals

Boston Metal Roofing · Fast response in Cambridge and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cambridge is a city of tight lots, steep Victorian gables, and triple-deckers that have been holding their own against New England weather for a century. From the brick row houses near Harvard Square to the wood-frame three-deckers off Cambridge Street, the housing stock here is old, varied, and unforgiving of roof problems. Metal roofing is a smart fit for this mix, especially on the bay windows, dormers, and porch roofs that define so many Cambridge homes.

Boston Metal Roofing is based just across the river and knows Cambridge block by block. We have worked on copper bay roofs near Porter Square, standing seam on low-slope additions in Inman Square, and stone-coated steel on Capes out toward Fresh Pond. When you call (857) 465-5405, you get a local crew that understands the city's historic character and the practical demands of its climate.

Metal Roofing in Cambridge (02163)

Cambridge sits on a glacial-till peninsula with granite ledge close to the surface, which makes for tight lots, narrow driveways, and staging challenges on almost every job. The city's housing stock ranges from 1850s brick row houses with flat and low-slope roofs to 1890s-1920s triple-deckers with shallow pitches, and Victorian Queen Anne homes with steep gables, towers, and dormers. Each type brings its own metal roofing solution: standing seam for low-slope additions and dormers, copper for bay windows and porch roofs, metal shingles or stone-coated steel for steep-slope Victorians. Salt air from Boston Harbor, humid summers, and winter freeze-thaw cycles corrode flashing and fasteners, while nor'easters drive rain sideways into seams. Ice dams at the eaves are a common winter failure on high-elevation homes. Our team is fully insured and experienced with the flashing, chimney, and skylight repairs these roofs often need.

We have served Cambridge and the surrounding Boston area for years, and we know the local building department's requirements, the historic district review process, and the practical realities of working on tight urban lots.

Our services in Cambridge

How a Job Works in Cambridge

Step 1: Call us at (857) 465-5405 or request a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. For storm damage, we offer free inspections and can document the damage for your insurance claim.

Step 2: Once you approve the estimate, we schedule the work and handle the permitting. In Cambridge, roofing permits are commonly required for full replacement or re-roof, and historic district or HOA design review may restrict panel profile and color. We coordinate with the city and your HOA to keep the project moving. On tight lots, we plan material delivery and staging carefully to avoid blocking neighbors or streets.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and walk the property with you to ensure everything meets your expectations. We leave your property clean and your roof ready for the next New England season.

Pricing for metal roofing in Cambridge depends on the size and complexity of your roof, access, existing conditions, and urgency. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, metal roof replacement at $9 per square foot, and metal roof over shingles (retrofit) at $7 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. For a precise quote on your Cambridge property, call (857) 465-5405 for a free estimate.

My triple-decker near Inman Square has a low-slope roof and original skylights. Can you install standing seam without removing the skylights?
Yes, we can often work around existing skylights by integrating new flashing and curbs into the standing seam system. On low-slope roofs, proper flashing detail is critical to prevent leaks, especially with Cambridge's freeze-thaw cycles. We will assess the condition of the skylights and recommend repair or replacement if needed.
A nor'easter just lifted some panels on my roof in Cambridge. How quickly can you respond for emergency repair?
We prioritize storm damage calls and can usually inspect within 24 to 48 hours, depending on demand. Call us at (857) 465-5405 to schedule a free inspection. We will secure the roof, document the damage for insurance, and provide a repair estimate.
What does a typical metal roof repair cost in Cambridge, and what factors affect the price?
Most repairs start at $450, but the final cost depends on the extent of damage, roof accessibility, and whether flashing or fasteners need replacement. For example, a leak around a chimney on a steep Victorian roof may cost more than a simple fastener repair on a low-slope triple-decker. We provide free estimates so you know the price before we start.
Do I need a permit to replace my roof in Cambridge, and how do I find out about historic district rules?
Yes, roofing permits are commonly required for full replacement or re-roof in Cambridge. Thresholds and fees vary, and if your home is in a historic district, design review may restrict panel profile and color. We recommend checking with the City of Cambridge website (https://www.cambridgema.gov/) or calling the building department to confirm requirements. We can also help guide you through the process.
My neighbor and I share a property line, and I want to install a metal roof that might overhang slightly. What should I do?
Property line issues can be sensitive. We recommend reviewing your property survey and local setback rules before installation. If your home is in an HOA, check the architectural guidelines for roof overhang restrictions. We can adjust the design to stay within your property lines and coordinate with your neighbor if needed.
Are you fully insured for roofing work in Cambridge, and what does that cover?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects your property and our crew in case of an accident.
What maintenance should I do on my metal roof in Cambridge to prepare for winter?
Before winter, clear debris from gutters and roof valleys, check for loose fasteners or damaged flashing, and consider installing snow guards to prevent ice dams. In Cambridge's freeze-thaw climate, ice dams at the eaves are a common cause of leaks. We offer maintenance inspections and can install snow guards starting at $1,200.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm