Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Malden, MA (02148) · Local Professionals

Boston Metal Roofing · Fast response in Malden and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Malden's triple-deckers and two-family houses sit tight on small lots, and those low-slope roofs take a beating every winter. If you live off Salem Street or near the Malden Center T stop, you already know how ice dams and nor'easters can find every weak seam.

We're Boston Metal Roofing, and we've worked on roofs from Maplewood to Linden. Homeowners in 02148 call us because we understand the specific challenges here: heavy snow load, freeze-thaw cycles, and older framing that needs careful flashing details. We're fully insured and we show up when we say we will.

Metal Roofing in Malden (02148)

Malden's housing stock is mostly 1890s to 1920s wood-frame triple-deckers and two-family homes, many with shallow-pitch or low-slope roofs that were never designed for the snow loads we get now. The dense lots mean narrow side yards and limited access for staging materials, and the granite ledge under parts of the city can make ground anchoring tricky. We see a lot of ice damming at the eaves on these older homes, especially where insulation is thin and ventilation is poor. Salt air from the harbor isn't a major factor this far inland, but humid summers and freeze-thaw cycles still corrode fasteners and flashing over time. Our team knows how to work around chimney stacks, bay windows, and the tight property lines common in neighborhoods like Edgeworth and West End.

We've been serving Malden and the surrounding Boston area for years, and we've seen just about every roofing problem this city can throw at a house. From standing seam on a low-slope triple-decker to stone-coated steel on a Cape, we match the material to the building and the budget.

Our services in Malden

How a Job Works in Malden

Step 1: You call us at (857) 465-5405 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we'll walk the roof with you, check the flashing, fasteners, and drainage, and talk through options. We'll give you a written estimate before any work starts.

Step 2: Once you approve, we pull the necessary permits with the City of Malden (rules vary, so we verify with the building department). On tight lots, we plan material drops carefully to avoid blocking driveways or sidewalks. If your home is in a historic district or under HOA review, we help coordinate the paperwork and color choices. Most residential metal roofs take a few days to a week, depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, use magnets to pick up stray screws, and make sure your gutters and downspouts are clear. You'll get a chance to inspect the work and ask questions before we call the job done.

Pricing in Malden depends on the size and pitch of your roof, access, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can recover. Repairs start at $450, and leak repair also starts at $450. Snow guards and ice protection start at $1,200, which is a common add-on for Malden's low-slope roofs. We always provide a free estimate so you know the real number before we start. Call (857) 465-5405 to schedule yours.

My triple-decker near Malden Center has a low-slope roof that leaks every winter. Can a metal roof fix that?
Yes, and it's one of the most common jobs we do in Malden. Low-slope roofs on older triple-deckers often suffer from ice damming because heat escapes and melts snow, which refreezes at the eaves. We can install a standing seam metal roof with proper underlayment and ice-and-water shield, and we'll also check your ventilation and insulation. That combination usually solves the problem for good.
A nor'easter just ripped panels off my roof in Maplewood. How fast can you respond?
We prioritize storm damage calls, especially when there's an active leak or exposed decking. Call us at (857) 465-5405 and we'll schedule an inspection as soon as possible, often the same day or next. We can tarp the roof to prevent further damage and then work with you on insurance documentation if you're filing a claim.
What does a typical metal roof replacement cost for a two-family in Malden?
Most two-family homes in Malden have roofs in the 1,200 to 1,800 square foot range. At our starting price of $9 per square foot for replacement, you're looking at roughly $10,800 to $16,200, but that can go higher if there's structural work needed, if access is difficult, or if you choose a premium material like copper. We give you a detailed estimate after inspecting the roof.
Do I need a permit to replace my roof in Malden, and how long does it take?
Yes, the City of Malden typically requires a building permit for a full roof replacement or re-roof. The exact requirements and fees can change, so we always verify with the Malden Building Department before starting. Permit turnaround is usually a few days to a couple of weeks, depending on the season. We handle the paperwork for you.
My neighbor's tree branches hang over my roof. What are my rights if I need roof work?
In Massachusetts, you generally have the right to trim branches that overhang your property line, but you should check with your neighbor first and make sure you don't damage the tree. If a branch falls and damages your roof, your insurance may cover it. We can help document the damage and work with your adjuster. For HOA properties, review your bylaws before scheduling work.
Are you fully insured for roofing work in Malden?
Yes, we carry general liability insurance and workers' compensation coverage. That protects you and your property in case of an accident.
How often should I have my metal roof inspected in Malden?
We recommend an inspection every two to three years, and always after a major storm. Malden's freeze-thaw cycles can loosen fasteners and stress flashing, especially on older homes. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm