Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Revere, MA (02151) · Local Professionals

Boston Metal Roofing · Fast response in Revere and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Revere is a coastal city where salt air and nor'easters test every roof. The housing stock here is a mix of beachside two-families, ranches, and triple-deckers, many built between the 1890s and 1950s, with low-slope and shallow-pitch roofs that take a beating from wind-driven rain and winter ice. If you live near Revere Beach, Point of Pines, or along Broadway, you know how fast a loose fastener can turn into a leak.

That's why homeowners in Revere (02151) call Boston Metal Roofing. We understand the local challenges, from corroded flashing on older homes to wind-lifted panels after a storm. Our team provides metal roofing installation, repair, and replacement tailored to Revere's climate and building styles. We're fully insured and ready to help protect your property.

Metal Roofing in Revere (02151)

Revere's terrain is flat near the beach but rises toward the west, with tight lots and sandy soil that can affect drainage. Many homes sit close to neighbors, and properties near the marshlands of Rumney Marsh Reservation face additional moisture. The salt air accelerates corrosion on fasteners and flashing, especially on older two-families and ranches. Ice dams form at the eaves during freeze-thaw cycles, and nor'easters drive rain sideways under shingles and into seams. We've seen it all: separated seams on standing seam roofs, punctures from fallen limbs, and wind-peeled panels after storms.

Our team has years of experience serving Revere and the greater Boston area. We know the local building codes and the common failure points for metal roofs here. Whether you need a new standing seam roof on a beachside home or a repair on a triple-decker, we have the skills and materials to do it right.

Our services in Revere

How a Job Works in Revere

Step 1: Call us at (857) 465-5405 or request a free on-site assessment. We'll inspect your roof, discuss your needs, and provide a detailed estimate. We'll also check for any permit requirements with the City of Revere.

Step 2: Once you approve, we schedule the work. For tight lots or homes with limited access, we plan carefully to avoid disruptions. We handle permit coordination and keep you informed throughout the project. Our crews are trained to work safely around Revere's coastal conditions.

Step 3: After completion, we clean up thoroughly and walk you through the finished job. We leave your property clean and ensure you're satisfied with the work. We also provide maintenance tips to keep your metal roof performing well in Revere's climate.

Pricing for metal roofing in Revere depends on the size, access, condition, and urgency of your project. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles at $7. Repairs start at $450, and screw replacement at $750. Coating and painting start at $2.50 per square foot, and gutters at $9 per linear foot. These are starting prices; we provide a free estimate tailored to your specific property. Call (857) 465-5405 to schedule yours.

My two-family near Revere Beach has a low-slope roof and I'm worried about ice dams. Can a metal roof help?
Yes, a properly installed metal roof with adequate insulation and ventilation can reduce ice dam risk. We often recommend standing seam with snow guards for Revere's coastal homes. Our team can assess your roof and suggest the best solution.
A nor'easter just peeled back some panels on my roof in Point of Pines. How quickly can you respond?
We prioritize storm damage emergencies. Call us at (857) 465-5405, and we'll schedule an inspection as soon as possible. We can secure the roof and provide a repair estimate quickly.
What's the typical cost for a metal roof replacement on a ranch in Revere?
For a ranch, replacement typically starts around $9 per square foot, but factors like roof size, pitch, and material choice affect the final price. We offer free estimates to give you an accurate figure.
Do I need a permit for a metal roof replacement in Revere?
Yes, roofing permits are generally required for replacement or re-roof. Requirements vary, so we recommend checking with the City of Revere Building Department. We can help guide you through the process.
My neighbor's tree branches overhang my roof. What are the rules about property lines and trimming?
In Massachusetts, you generally have the right to trim branches that overhang your property, but it's best to communicate with your neighbor first. If you're in an HOA, check their rules. We can advise on protecting your roof from overhanging limbs.
Are you insured for work on my Revere property?
Yes, we are fully insured with general liability and workers' compensation coverage for your protection and ours.
How often should I have my metal roof inspected in Revere?
We recommend annual inspections, especially after winter storms. Salt air and freeze-thaw cycles can loosen fasteners and cause corrosion. Regular maintenance extends your roof's life.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm