Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Quincy, MA (02170) · Local Professionals

Boston Metal Roofing · Fast response in Quincy and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Quincy's Capes, ranches, and two-families near the bay take a beating from salt air, nor'easters, and freeze-thaw cycles, and most of them are still wearing shingles that were never meant to last this long. If you live off Sea Street or up on Wollaston Hill, you already know how fast a winter can find the weak spot in a roof.

We're Boston Metal Roofing, and we work Quincy (02170) and the surrounding neighborhoods every week. From the tight lots near Adams Shore to the bigger yards out toward Squantum, we've seen what salt and snow do to flashing, fasteners, and seams, and we build metal roofs that hold up to it.

Metal Roofing in Quincy (02170)

Quincy sits on a glacial-till peninsula at the edge of Boston Harbor, and that shapes every roofing job here. The ground is often granite ledge just under a thin layer of soil, so drainage around the foundation matters as much as the roof itself. Lots are tight in the older neighborhoods near Quincy Center and Wollaston, which means staging materials and getting a crew safely onto a low-slope porch roof takes planning. Many Capes and ranches here have shallow pitches and wide eaves that collect ice in February, and the salt air off the bay corrodes standard fasteners and flashing faster than most homeowners expect. We see a lot of failed pipe boots, separated seams on older panels, and wind-lifted edges after a nor'easter rolls through. On the triple-deckers and two-families closer to the water, we often recommend standing seam or a retrofit over the existing shingles to avoid tearing off layers and to keep the profile low. Our team knows the difference between a roof that looks fine from the street and one that will actually keep the water out through a Quincy winter.

We've been serving Quincy and the greater Boston area long enough to know which neighborhoods need extra attention to ice dams, which ones fight wind uplift, and where historic or HOA rules might affect panel profile and color.

Our services in Quincy

How a Job Works in Quincy

Step 1: You call us at (857) 465-5405 or send a request, and we schedule a free on-site assessment. We walk the roof, check the attic and flashing, and talk through what you're seeing, whether it's a leak near a chimney on a Cape off Hancock Street or a wind-lifted panel on a ranch near Faxon Park. You get a clear written estimate before any work starts.

Step 2: Once you approve, we pull the permit with the City of Quincy and schedule the crew. On tight lots near the bay, we plan material drops and staging so we don't block driveways or damage landscaping. If your home is in a historic district or under HOA review, we help coordinate the paperwork and color choices before we order panels. Most residential metal roof installations take a few days to a week depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. We haul away old materials, check gutters and flashing, and make sure you know how to reach us if anything comes up after we leave. We leave your property clean and your roof ready for the next Quincy winter.

Pricing in Quincy depends on the size and pitch of your roof, how many layers are already there, access around tight lots, and whether we're repairing or replacing. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Smaller jobs like metal roof repair or leak repair start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Coating and painting starts around $2.50 per square foot. Every roof is different, so call (857) 465-5405 for a free estimate and we'll give you a real number for your Quincy property.

My Cape near Adams Shore has ice dams every winter. Will a metal roof stop that?
Ice dams usually come from warm air escaping into the attic and melting snow that refreezes at the eaves. A metal roof sheds snow better than shingles, but we also check insulation, ventilation, and eave flashing when we assess your roof. On many Quincy Capes, adding proper ice-and-water shield and improving attic ventilation solves the problem, and metal roofing gives you a smoother surface so snow slides off instead of sitting.
A nor'easter peeled back part of my roof near Wollaston. How fast can you get out?
We handle storm and wind damage repair across Quincy and offer free inspections for storm damage. Call us at (857) 465-5405 and we'll schedule an assessment as soon as possible, usually within a day or two depending on demand after a major storm. We can tarp or secure the area if needed and give you a written repair estimate.
What does a typical metal roof replacement cost for a ranch in Quincy?
For a standard ranch in Quincy, most metal roof replacements fall in the range of $9 to $14 per square foot installed, depending on the panel type, roof pitch, number of penetrations, and whether we need to remove existing layers. A simple ranch with good access might be on the lower end, while a roof with dormers, skylights, or tight lot access will be higher. We give you a firm estimate after a free on-site visit.
Do I need a permit from the City of Quincy for a metal roof?
Yes, most full roof replacements and re-roofs in Quincy require a building permit, and the requirements can vary depending on the scope of work and whether your home is in a historic district. We pull the permit for you as part of the job. For specific rules and current fees, check the City of Quincy website or call the building department directly before you start planning.
My neighbor's tree hangs over my roof line. What are my options if branches damage my metal roof?
Property line issues are common in Quincy's tighter neighborhoods. If a neighbor's tree drops limbs on your roof, your insurance may cover the repair, and we can document the damage for your claim. We recommend talking with your neighbor about trimming before storm season, and if you're in an HOA, check the association rules on landscaping and roof work. We can inspect and repair any punctures or dents from fallen limbs.
Are you fully insured for work on my Quincy property?
Yes, Boston Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Quincy's salt air?
Salt air speeds up corrosion on fasteners and flashing, so we recommend an annual inspection, especially on roofs near the water in Squantum or Adams Shore. Check for loose screws, worn sealant around penetrations, and any debris in the gutters. A light coating can extend the life of older panels. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm