Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Newton, MA (02461) · Local Professionals

Boston Metal Roofing · Fast response in Newton and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Newton is a city of villages, and its roofs show it. From the big Colonials and Capes on quiet streets near Newton Centre and Waban to the older Victorians closer to Nonantum and Newtonville, most of these homes sit under mature maples and oaks that drop limbs and leaves every season. The lots are tight, the pitches are often steep, and the weather off the Charles River basin is not gentle.

Homeowners in Newton (02461) call Boston Metal Roofing because we know what these roofs go through: nor'easters driving rain sideways, ice dams at the eaves, and summer storms that send branches down. We are based in Boston, fully insured, and we handle everything from a single leak repair to a full standing seam installation. Call (857) 465-5405 for a free estimate.

Metal Roofing in Newton (02461)

Newton's housing stock is mostly 1920s to 1960s Colonials, Capes, and brick ranches with steep to moderate pitches, plus a fair number of older Victorians and Queen Annes with dormers and towers. That means two things for roofing work: access is often tight, and the roof geometry is rarely simple. Add in the tall oaks and maples that shade many streets, and you get a steady supply of fallen limbs, clogged gutters, and moss on north-facing slopes. The glacial till under much of the city also means granite ledge is never far down, which can affect how we anchor ladders and stage materials.

Our team has worked on roofs across Newton and the surrounding Boston area for years. We know how to handle the steep pitches on a Colonial near Newton Highlands, the low-slope porch roofs on older homes, and the copper bay windows and dormers that show up in the more historic neighborhoods. Whether you need a standing seam roof that sheds snow and leaves, or a repair after a nor'easter, we have the experience to do it right.

Our services in Newton

How a Job Works in Newton

Step 1: You call us at (857) 465-5405 or fill out our contact form. We schedule a free on-site assessment at your Newton property. We look at the roof, the flashing, the gutters, and the attic if accessible. We check for active leaks, separated seams, and signs of ice damming. Then we give you a written estimate with options, no pressure.

Step 2: Once you approve, we pull the necessary permits. Roofing permits are required for most replacements and re-roofs in Newton, and the rules vary, so we always check with the city. If your home is in a historic district or under HOA review, we help coordinate the paperwork. On the job, our crew protects your landscaping and works around tight lot lines. We stage materials carefully and keep the site secure.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you. We do not leave until you are satisfied and your property is clean.

Pricing in Newton depends on the size and pitch of your roof, the material you choose, and how accessible the site is. For a typical Newton Colonial or Cape, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and replacement starts at $9 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot. Smaller jobs like leak repairs start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingles start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. We always provide a free estimate so you know the full cost before we start. Call (857) 465-5405 to schedule yours.

My Newton home has a steep roof with dormers and a tight lot. Can you still install standing seam?
Yes. Steep pitches and tight lots are common in Newton, especially in neighborhoods like Newton Highlands and Waban. We use specialized staging and fall protection, and we plan the panel layout carefully to minimize waste and fit the dormers and valleys properly. Our crew is trained for this kind of work.
A nor'easter just tore off some panels. How fast can you respond for an emergency repair in Newton?
We prioritize storm damage calls. Call us at (857) 465-5405 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area temporarily if needed and then give you a repair estimate.
What does a metal roof cost for a typical Newton Cape or Colonial?
For a typical 1,800 to 2,500 square foot roof, installation starts around $8 per square foot, so you might be looking at $14,000 to $20,000 for basic panels, more for standing seam or specialty metals. The exact price depends on pitch, access, and whether we need to remove existing layers. Call for a free estimate.
Do I need a permit for a metal roof in Newton?
Yes, most roof replacements and re-roofs require a building permit in Newton. The rules and fees vary, so we always verify with the city before starting. You can check the City of Newton website for general information, but we handle the permit application for you.
My neighbor's tree hangs over my roof. What can I do about branches and property lines?
In Massachusetts, you generally have the right to trim branches that overhang your property line, but you should not damage the neighbor's tree. If a branch falls and damages your roof, your insurance may cover it. We can inspect and document any damage for your claim. For HOA properties, check your association's rules about exterior changes before scheduling work.
Are you fully insured for work at my Newton home?
Yes, we carry general liability insurance and workers' compensation for all our crews.
How should I maintain my metal roof in Newton's climate?
Keep gutters and valleys clear of leaves and debris, especially in the fall. Check for loose fasteners or damaged flashing after major storms. In winter, avoid walking on the roof and use a roof rake to remove heavy snow from the eaves to prevent ice dams. We offer annual inspections and maintenance plans to keep your roof in good shape.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm