Serving the Boston area  ·  (857) 465-5405  ·  Open Mon-Sun 7am-7pm
📞 (857) 465-5405 Free Quote

Metal Roofing in Framingham, MA (01701) · Local Professionals

Boston Metal Roofing · Fast response in Framingham and the Boston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+318Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Framingham is a city of contrasts: 1950s brick ranches off Route 9, tight-knit triple-deckers near the commuter rail, and older Colonials with steep gables on tree-lined streets like Pleasant and Central. The housing stock here spans a century, and so do the roofing problems we see.

Homeowners in 01701 call Boston Metal Roofing because we understand how Framingham's mix of older shingle roofs, outbuildings, and light commercial properties reacts to nor'easters, ice dams, and summer hail. From the Framingham Centre Common to the shores of Lake Cochituate, we've helped property managers and homeowners stop leaks and upgrade to metal that lasts.

Metal Roofing in Framingham (01701)

Framingham's terrain rolls from the low, wet edges near the Sudbury River to the higher ground around Nobscot and Saxonville. That means drainage matters: older neighborhoods like Coburnville and South Framingham have tight lots where runoff from a steep pitch can pool against foundations. Many ranches and split-levels off Edgell Road have low-slope porch roofs and shallow-pitch garages, prime candidates for standing seam or corrugated panels that shed water fast. On the other side, the Victorian-era homes near Framingham Centre often have complex gables, dormers, and chimneys that need careful flashing and custom metal work. We also see plenty of detached garages, sheds, and small workshops on larger lots, where exposed-fastener panels are a practical, budget-friendly choice. Our crews are trained to handle everything from a simple re-fastening on a ribbed panel roof to a full copper bay window surround. We know the local building department's inspection rhythm and plan our schedules around it.

We've been serving Framingham and the greater Boston area for years, and we've learned that no two streets are alike. Whether it's a 1920s Colonial near Cushing Memorial Park or a newer in-fill duplex off Route 126, we bring the same approach: assess the deck, check the flashing, and recommend the right metal system for the pitch and the weather.

Our services in Framingham

How a Job Works in Framingham

Step 1: Free on-site assessment. We start with a call to (857) 465-5405 or a request through our site. A project manager meets you at the property, walks the roof (or uses a drone for steep or fragile sections), and checks the attic and gutters. We'll talk through your options, from a repair to a full replacement, and give you a written estimate the same day. If you're in a historic district or an HOA, we'll note any design review requirements upfront.

Step 2: The work itself. We schedule around Framingham's permit timelines and order materials to match. On tight lots near downtown, we use compact lifts and careful staging to keep driveways clear. If your roof has multiple layers of old shingles, we'll confirm the local code limit before recommending a retrofit. Our crews are fully insured, and we protect landscaping and siding with tarps and plywood. For commercial or agricultural buildings, we coordinate around your operating hours.

Step 3: Cleanup and final walkthrough. We magnet-sweep the yard for nails, haul away all debris, and walk the finished roof with you. You'll get a written warranty and a maintenance checklist. We leave your property clean and your roof ready for the next nor'easter.

Pricing in Framingham depends on the job. A basic metal roof repair, like fixing a leak or replacing a few fasteners, starts around $450. Screw replacement and re-fastening on an existing panel roof runs from $750. For a full installation, corrugated and ribbed panel roofing starts at $5.50 per square foot, while standing seam starts at $10 per square foot. Metal shingle and stone-coated steel roofs start at $9 per square foot, and copper or specialty metals start at $20 per square foot. A full replacement typically starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Key cost factors include roof size and pitch, access (tight lots or steep grades), the condition of the deck and flashing, and how soon you need the work done. We give free estimates and never surprise you with hidden fees. Call (857) 465-5405 to schedule yours.

My 1950s ranch near Framingham Centre has a low-slope porch roof that keeps leaking. Can metal roofing fix that?
Yes. Low-slope roofs are where metal really shines. We often install standing seam or corrugated panels on porch roofs and additions because they shed water quickly and handle snow melt better than shingles. We'll check the deck and flashing first, since leaks on low-slope roofs often come from failed seams or wall junctions, not the panels themselves.
A nor'easter tore some panels off my garage in Saxonville. How fast can you get out for storm damage?
We offer free storm and wind damage inspections and prioritize emergency calls after major weather. Call (857) 465-5405 and we'll schedule a visit as soon as possible, usually within 24 to 48 hours depending on volume. We can tarp the area to prevent further water damage and give you a written repair estimate on the spot.
What does a typical metal roof replacement cost for a 1,500-square-foot Colonial in Framingham?
For a 1,500-square-foot roof with moderate pitch, a standing seam replacement typically starts around $15,000 to $20,000, while a corrugated panel system might start closer to $8,000 to $12,000. The exact price depends on the number of penetrations (chimneys, skylights), the condition of the deck, and whether we need to remove old layers. We provide a detailed written estimate after a free inspection.
Do I need a permit to replace my roof in Framingham, and how long does it take?
Yes, the City of Framingham generally requires a building permit for a full roof replacement or re-roof. The permit fee and inspection requirements are set by the local building department, and we handle the application for you. Timing varies, but most permits are issued within a week or two. If your home is in a historic district or subject to HOA rules, there may be additional design review, so we check that early.
My neighbor's tree branches hang over my roof. What are my rights if I want to trim them before installing a metal roof?
In Massachusetts, you generally have the right to trim branches that overhang your property line, but you cannot damage the neighbor's tree or enter their property without permission. We recommend talking with your neighbor first. If trimming is needed for access or to prevent damage, we can document the condition and coordinate with you. For HOA communities, check your bylaws before any trimming.
Are you insured for work at my Framingham property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property in case of an accident on the job.
What maintenance should I do on my metal roof in Framingham to prevent ice dams?
Ice dams are common here because of our freeze-thaw cycles. Keep gutters clear of leaves from the maples and oaks, and consider snow guards above entryways and walkways. We also recommend an annual inspection, especially after winter, to check fasteners and seals. A coating can extend the life of older panels. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in Boston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Boston

All your work handled by qualified professionals in Boston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

318+ Verified Client Reviews in Boston

⭐⭐⭐⭐⭐ 4.9/5 · 318 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Boston · Response within 24h · No commitment · ☎ (857) 465-5405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Boston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm